Optic Frame Mount for 2011 MRDA

$155.00

Davinci Machining is upgrading its Optic Frame mount for 2011, introducing the Modular Red Dot Adapter (MRDA). This product will allow the shooter to utilize a variety of red dot sights on the same Open Gun Mount.

That way, you can easily switch from one Red Dot Brand to another without replacing your mount.

Precision-machined from 7075 aircraft aluminum. Extra material is required to allow custom modifications, such as using either narrow or extra wide 2011 Pistol Frames, designed by shooters for the discerned shooters.

Our optic frame mount has a completely adjustable thumb rest to get that perfect angle for how you grip your pistol, with 6 available angle options. We have 5 screws that hold the frame mount to your gun.

This mount has a minimum clearance of 1.175″, measured from the centerline of the 5 holes in the pistol frame. So, measure your gun to make sure it will fit. We found some profiles of slides, and the location of mounting holes requires more clearance than these mounts provide. A normal round top will need to be converted to a flat top. The optic base has extra material (about  0.180) that can be removed under the top plate to help with clearance; 0.050 thousand can be removed without problem, but remember that the base has a negative angle, being the front is a little lower than the rear so take in consideration and more material will be removed from the front than the rear if the part is indicated properly; it will behave like a wedge. It is always recommended to rely on a professional gunsmith for major works.

Description

Compatible Red Dot Sights (Mounting Screws INCLUDED):

  • Trijicon RMR/SRO
  • Insight MRDS
  • Eotech MRDS
  • Leupold Delta Point
  • Leupold Delta Point Pro
  • Vortex Razor
  • Vortex Viper
  • Vortex Venom
  • CMORE RTS & STS
  • Shield RMS

Requires a purchase of mounting screws

  • Holosun 507 ”C”/407 ”C” V1 versions – require a purchase of 6-40 Screws For Holosun V1 Red Dot
  • Holosun 508 ”T
  • UTG Reflex Micro Dot
  • TruGlo Tru-Tec
  • Sig Romeo 3, Romeo 3 Max, Romeo 3 XL

Mounting Hardware:

  • (2) 6-48 Weaver T-10 Torx Head Screws
  • (4) Sight alignment pins
  • (2) M3 x 8mm Flat Head Screws
  • (2) M3 x 9mm Flat Head Screw
  • (2) M3 x 6mm Flat Head Screws
  • (2) M3 x 6mm Socket Head Cap Screws
  • (2) 6-40 Flat Head Screws – RMR
  • (2) M4 X 10mm Rounded Head Screws